10

2023-05

How to treat the surface of galvanized barrels

As we all know, the surface of galvanized barrels will have some rust problems during long-term use. How should the surface treatment of galvanized barrels be done? The editor will give you a detailed analysis now.

2023-05-10

10

2023-05

How to control the temperature of galvanized barrels during processing?

Galvanized barrel is a product widely used in the chemical industry. Pay attention to temperature control during processing, and control the temperature of the mold, cylinder temperature and nozzle temperature when controlling the temperature. The manufacturer has specially sorted out this knowledge, and the following will introduce it to you.

2023-05-10

10

2023-05

Corrosion resistance of paint barrels

The paint barrel adopts the international advanced trilateral technology, with low water vapor penetration rate and good sealing performance. Introduce automatic painting equipment and implement the national standard GB/325-2000. The annual capacity 100.000 or more, and the product quality has reached the domestic advanced level. Next, let's take a look at the corrosion resistance of the paint barrel.

2023-05-10

10

2023-05

Guidelines for Proper Storage of Galvanized Iron Drums

Because galvanized iron barrels are steel products, they are easy to rust in a humid environment. Rust will cause the paint on the surface of the galvanized iron barrel to fall off, or the electroplating layer to fall off, causing surface quality damage. Long-term corrosion, galvanized iron barrels may leak or have serious internal corrosion, losing their use value.

2023-05-10

10

2023-05

Are some uses of galvanized barrels really feasible?

Science is everywhere, it is often around you, and you have not discovered it. Let us walk into science and explore its path. If we do not seriously understand science, there may be some dangers in use, such as simple galvanized barrels should also be carefully understood before use.

2023-05-10

10

2023-05

The difference between baking paint and galvanizing on the surface of galvanized barrels

Whether it is containing food, beverages, children's toys, pencil cases, etc., it should be produced as required. This requires each galvanized barrel printing and iron can factory to master every link in paint, coating, baking and parts in order to produce qualified products.

2023-05-10

10

2023-05

Analysis of Quality Problems and Causes of Galvanized Barrel Raw Materials

Considering the production process of galvanized barrel hot-dip galvanized steel sheet and finished product packaging and other factors, hot-dip galvanized steel sheet may have some of the following surface appearance defects:

2023-05-10

10

2023-05

Paint bucket painting process

After cold rolling, the paint barrel has the characteristics of high flatness, high surface finish, easy coating and wide variety. It has high stamping performance and low yield point, and can obtain thinner and more precise cold-rolled strips and steel plates.

2023-05-10

10

2023-05

What should be paid attention to when welding and cutting paint buckets containing flammable and explosive products?

Because paint buckets are often used to hold flammable and explosive products such as gasoline, diesel oil, kerosene, etc. It is very easy to cause explosion accidents by rashly welding and cutting paint buckets containing these flammable and explosive products. Before welding and cutting such paint buckets, construction personnel must take safety measures. So what safety measures should be taken when welding and cutting paint buckets?

2023-05-10

10

2023-05

Weld Zinc Supplementation Method in Galvanized Barrel Production

Galvanized steel sheets are commonly used in the production of steel galvanized barrels. Since the steel sheet itself has a galvanized layer, it generally does not need to be painted again. In the production process, the seam welding of galvanized steel sheets destroys the galvanized layer at the weld, thereby destroying its corrosion resistance and aesthetics. Therefore, after the barrel body is welded, the weld part must be replenished with zinc to restore its original function. Let's first talk about the difference between steel galvanized barrels and electroplated steel barrels.

2023-05-10

< 1 >